Product specifications

PERIPHERALS
Specifications subject to change without notice: Revision date 10/07 Page 89 of 266
Metrologic MS6720 Scanner - Programming Requirements:
Scan the following in order from top to bottom.
Unplug the scanner power supply. Then re -
connect (power 0ff/on); This RESET is necessary
for the scanner to work properly.
Your Scanner is now ready for use. You will have
to program the items you will be scanning into
the register.
(8)
ENABLE UPC PREFIX
ENTER PROGRAM MODE
(1)
RECALL DEFAULTS
(2)
PARITY = ODD
(3)
ENABLE RTS/CTS
(4)
DISABLE LINE FEED
(5)
4800 BAUD RATE
(6)
ENABLE STX PREFIX
(7)