Product specifications

PERIPHERALS

Specifications subject to change without notice: Revision date 10/07 Page 57 of 266

Procedure:

Enter the PGM2-Mode as previously outlined

1. Enter 2690

2. Depress [.] key

3. Depress [@/FOR] key

4. Enter 1

5. Depress [@/FOR] key

6. Enter assigned channel numbers ( 4 digits)

7. Depress [SBTL] key

8. Depress the [CA/AT] key

Channel Assignment for COIN DISPENSER:

Quick Steps – Coin Dispenser

To quickly setup the ER-A520/ER-A530 to interface with a coin dispenser, please refer to the

outlined procedures below:

No. Description Comments/Procedure

Step–1 Connect the Coin Dispenser CH–1 or CH–2

Step–2

PGM Job#2690

2690 Æ [.] Æ [@] Æ 1 Æ @ Æ 0001 [SBTL] Æ [CA/AT] for CH–1)

2690 Æ [.] Æ [@] Æ 1 Æ @ Æ 0002 [SBTL] Æ [CA/AT] for CH–2)

Note: Must match the physical connection

Step–3

Program Reset

• Place the SRV-Key counter-clockwise to 6 o’clock position

(SRV’ position)

• Count 5 seconds

• Turn SRV-Key clockwise to 7o’clock position (SRV position)

• Verify”***PROGRAM RESET has printed on the journal-side

tape.

Step–4 PGM Job#2510 Verify that the Cashiers have a valid Drawer Assignment (1 or 2)