Product specifications

LOGO UTILITY
Specifications subject to change without notice: Revision date 10/07 Page 251 of 266
Reset Procedures
1. Program (SRV) Reset:
To perform a Program Reset, the SRV key (p/n: LKGiM7113RCZZ) must be used. Please refer to the
following diagram when performing the following key sequence.
(1) Insert the SRV key and rotate it counterclockwise to the 6 o'clock position to the SRV position.
(Please note that the display goes out.)
(2) Count for 5 seconds.
(3) Rotate the SRV key clockwise to the SRV (7 o'clock) position.
(Please note that the display becomes lit and PRG. RESET is printed on the journal printer)
Failure to adhere to the above procedure may result in corrupt or broken RAM addressing.