Product specifications

LOGO UTILITY
Specifications subject to change without notice: Revision date 10/07 Page 249 of 266
Functions Overview
The ER-A520/530 model ECR provides support for loading image data that may be used as an graphics
logo for the header or footer of a receipt. The data must meet the specifications defined within this
document that will outline the attributes necessary for loading the image data.
1. Type of function supported:
(1) Sending picture file (*.bmp or *.pcx) data to the ECR ........................PC to ER-A520/ 530
2. Function Supported:
(1) Changes the Image Logo for use on the ER-A520/530 on customer receipts and reports.
3. Format Specifications:
(1) File format: *.PCXor*.BMP
(2) Size: 360 dots (w) x 130 dots (h)
(3) Color: Monochrome only (black & white)
Introduction
This document will help you utilize the graphics logo function of the ER-A520/530 model ECR. This
documentation assumes that you are familiar with general PC and the Microsoft
®
Windows operating
system as it relates to the settings for the desktop, communications ports, etc. Please read this introductory
section carefully as it will provide helpful hints and recommendations that will make your time more efficient
and produce time saving results.
Recommended Sequence for the ER-A520/530
1. Always install the necessary options (i.e. optional RAM, etc.) prior to programming.
2. Start your programming sessions by executing one of the Master Reset operations.
(For detailed information about the MasterReset operations, please refer to the applicable Service Manual.)
3. Recommended order for programming:
Please complete the SRV mode and PGM mode sections in the order outlined below:
(1) Always back up your program prior to loading the Logo Image data into a customer’s
existing machine.
(2) Set the applicable SRV parameters (SRV job #912).
(The Logo image data replaces the ECR's "STAMP" image.)
(3) Load the image data to be used as the Logo (header or footer).
(4) Perform a Program Reset (SRV Reset).
(5) Back up the NEW Program with the Logo Image.
(6) Test system performance and reporting prior to installation.