Operating instructions

Example for bar code scanner Page 2 of 12 Issued: 03/2002

1. Which components are required?

Hardware components:

• 1 x bar code scanner (Metrologic IS6520 incl. power supply unit with connector and cable)

• 1 x basic unit (07 KT 96, 07 KT 97, 07 KT 98)

• 1 x power supply unit 24 V DC (e.g. 07 NG 34)

• 1 x adapter between scanner and PLC

• 1 x programming cable for the basic unit (07 SK 90)

For configuration with terminal (not absolutely necessary)

• 1 x terminal (MT45 with ARCNET driver)

• 1 x programming cable for the terminal (VB30)

• 1 x ARCNET cable incl. two terminating resistors

Software:

• 1 x programming software for the basic unit 907 AC 1131

• 1 x example program for the basic unit (Barcodeleser_MT45ARCNET)

For configuration with terminal (not absolutely necessary)

• 1 x programming software for the terminal SPSPlus Win

• 1 x example program for the terminal (Barcodeleser_MT45Arcnet.MDB)

Miscellaneous equipment for programming:

• 1 x PC (see 907 AC 1131 part 2, programming and block library, installation)

• 1 x documentation: - 907 AC 1131 part 1 (hardware and system technology)

- 907 AC 1131 part 2 (programming and libraries)

- Metrologic "Installation and User’s Guide"

- Metrologic "Programming Manual"

For configuration with terminal (not absolutely necessary)

- SAE planning manual

- SAE device manual MT45

In the following description you will find several references to the documentation.

FNOTE:

In this documentation all keyboard keys are enclosed by the characters < >.

Example: <F1> ... function key F1.

All menu items are put in quotation-marks, e.g. start page: "Start page".