Specifications

50
REGULATORY COMPLIANCE
Europe
The CE Mark is required on products that incorporate the IS4920 series engine
if the products are to be imported into European Economic Area (EEA)
countries. Use of the CE Mark requires compliance with directives and
standards dependent upon the type of product. Information may be found at
http://europa.eu.int/comm/enterprise/newapproach/.
LED Safety
IEC 60825-1:1993+A1+A2,
EN 60825-1:1994+A1+A2
“Safety of LED products”
Compliance with either of the standards listed above is required for the product
to bear the CE mark.
Note: Non EEA countries may impose additional testing/certification
requirements.
EMC
All combinations of IS4920 area imaging engines and associated electronics
will require certification of compliance with the European EMC Directive. EMC
compliance of finished products in Europe can be accomplished by the
following method:
• The manufacturer may certify to the EC’s Electromagnetic Compatibility
Directive 89/336/EEC. Compliance is required for the product to bear the
CE Mark.
Note: Non EEA countries may impose additional testing/certification
requirements.
The IS4920 series area imaging engine is designed to meet EN55022
Radiated Class B emission limits. The engine was installed in a representative
system and tested for compliance.
Electrical Safety
The IS4920 engines are built to conform to the European Low Voltage
Directive 73/23/ EEC.