Installation guide

10
MOUNTING SPECIFICATIONS
Enclosure Specifications
Minimum Allowable Window Position
Required To Avoid Detrimental Internal Reflective Beam Interference
at Negative Exit Beam Angle Tolerance
Figure 7.
Exit Beam
Depression Angle β
Minimum Projected Distance
from the Engine’s Base to the
Window’s Internal Surface (M)
Minimum
Window Angle θ
-2.5° 5.0 23.5°
-2.5° 10.0 16.5°
-2.5° 15.0 12.5°
-2.5° 20.0 10.5°
-2.5° 25.0 9.0°
-2.5° 30.0 8.0°
-2.5° 35.0 7.5°
-2.5° 40.0 7.0°
-2.5° 45.0 6.5°
-2.5° 50.0 6.0°
Specifications are subject to change without notice.