User`s guide

15
Code type enable/disable ESC V x y D x, y = 0 to 127 decimal
(1BH 56H x y 7FH) Starting at 0 (zero)
Add 1 to enable Codabar
Add 2 to enable Code 39
Example: [ESC V 35 0 DEL] Add 4 to enable UPC
Enable Code 128, Add 8 to enable EAN
Code 39 and Codabar Add 16 to enable ITF
Add 32 to enable Code 128
Starting at 0 (zero)
Add 1 to enable Code 93
Add 2 to enable Plessey
Add 4 to enable Code 11
Add 8 to enable Airline 2 of 5
Sound scanner beep ESC G DEL
(1BH 47H 7FH)
Disable/enable ESC H x DEL x = 30H(Disable) x = 31H(Enable)
good scan beep (1BH 48H x 7FH)
Sound razzberry tone ESC Z DEL
(1BH 5AH 7FH)
Disable Scanning ESC D DEL
(keypad and display (1BH 44H 7FH)
still active).
Note: Reserve code 94
must also be enabled.
Enable Scanning ESC E DEL
(1BH 45H 7FH)
Request Scanner ESC F DEL
Information (1BH 46H 7FH)
The scanner responds with:
xxxxxyyyyyzzZZ CR LF xxxxx = 5 digit software
(xxxxxyyyyyzzZZ 13H 10H) yyyyy = 5 digit model #
zz = number of rows/ display
ZZ = number of characters /row
Select Bar Code ESC K x DEL x (Auto Detect Mode-"default") = 30H
Detection Mode (1BH 4BH x 7FH) x (Detect & Notify*) = 31H
*A-command only active in this mode
Enable/Disable ESC H x DEL
good scan beep (1BH 48H x 7FH)
Use this command to activate the laser and scan the bar code present in the field (detected by the IR
sensor).