User`s guide

14
Command Processing Set for ScanKey Mode 2
To enter Mode 2, scan reserved bar code R88
To exit Mode 2, scan reserved bar code R89
Commands sent from the host system to enable/disable scanner functions:
Function Command x, y, z
To set activation range ESC R x DEL x = 4CH for Long; 53H for short
(1BH 52H x 7FH)
To set bar length ESC L x y DEL x (minimum) = 01H - 20H;
(1BH 4CH x y 7FH) y (maximum) = 01H - 20H
To clear entire display
ESC C DEL
(1BH 43H 7FH)
To clear individual ESC c x DEL x = 31H(clear line 1), 32H(clear line 2)
lines on display (1BH 63H x 7FH)
Display message ESC S x z DEL x = start pos
where x refers to the (1BH 53H x z 7FH) z = ASCII(data string)
starting position and
z represents the data
string to be displayed
x position table
@
A B C D E F G H I J K L M N O P Q R S
T U V W X Y Z [ \ ] ^ _ ! a b c d e f g