User`s guide
Table Of Contents
- IS4225 ScanGlove® Laser Bar Code Scanner Installation and User’s Guide
- Disclaimer / Trademarks
- Table of Contents
- Introduction
- Scanner and Accessories
- Scanner Installation
- Scanner Configuration to the Host System
- Parts of the Scanner
- Visual Indicators
- Audible Indicators
- Labels
- Maintenance
- Depth of Field
- Object Detection Device
- Specifications
- Default Settings
- Troubleshooting Guide
- Regulatory Compliance
- Patents
- Limited Warranty
- Index
- Customer Support
- Manual Date Code
PARTS OF THE SCANNER
Figure 1. Scanner Parts
Item
No.
Description
Green LED
When a bar code is read successfully, the green LED will flash.
Red LED
When the red LED is illuminated, the laser is on.
Red Output Window (Laser Aperture)
Object Detection Device
If a specified time has elapsed without any scanning, the unit will
enter a “standby” mode. To reactivate the unit, place an object in
front of the object detection field. The red LED will turn on when
the scanner is ready to scan.
Communication/Power Cable
This cable’s termination is application dependent.
4