User manual

ScanVue5
®
Mini Kiosk
User Manual
M37574–01T
Industrial Electronic Engineers, Inc.
23-June-2008 Rev T Page 42
Version Returns a string containing the software version number
Diversity Enable diversity antennas. ‘ENABLED’; ‘PRIMARY’; ‘SECONDARY’.
Use primary or secondary only as ScanVue5
®
has only one antenna.
The default is primary and the antenna is connected to the primary input
on the RF NIC card.
Wireless ‘TRUE’ sets ScanVue communications to wireless RF. ‘FALSE’ sets
communications to 10baseT Ethernet.
FlashHash A CRC calculated on the content of flash memory. The CRC is
displayed on the initial bootup status screen. Display format is CCCC–
TTTT where the 1
st
four hex digits are the calculated CRC and the 2
nd
four hex digits are the received CRC from the host. Both CRC’s must
match to ensure no file corruption during download. There is no error
correcting mechanism at this time. Also displays in UnitConfig.
Port2Function Changes the function of the external RS232 port. Port parameters are
fixed for each device (Value). The port passes data transparently in
both directions. The port function can be changed with modeset or the
UnitConfig utility. Factory default is scanner mode.
Value Function
SCANNER Receives data from hand scanner (input port)
OUTPUT Passes through data sent by server (output port)
BIDIRECTIONAL Operates in both directions
KEYPAD 20 key keypad
Port2Input Defines whether Scanvue sends a character at a time or a complete line
to server. Default value=CHARACTER
Value Function
LINE Buffers all characters until CR or LF received then
sends entire string to host.
CHARACTER Sends each character as received to host. Typically
used with NCR K590 printer
Port3Function Changes the function of the second external RS232 port #3. This
physical port does not exist on later (LX800) ScanVues, but the settings
are used for the USB Magnetic Stripe Reader. Port parameters are
fixed for each device (Value). The port passes data transparently in
both directions. The port function can be changed with modeset or the
UnitConfig utility.
Value Function
OUTPUT Passes through data sent by server (output port)
KEYBOARD Keyboard input
TOUCHSCREEN Enables Touch Screen input
BIDIRECTIONAL Operates in both directions
MSR Magnetic Stripe Reader input
NONE Disabled