User manual

ScanVue5
®
Mini Kiosk
User Manual
M37574–01T
Industrial Electronic Engineers, Inc.
23-June-2008 Rev T Page 23
Figure 11—Unit Configuration (UnitConfig) Screen
Configuration Rules
1. Set the UnitIP to DHCP to have ScanVue5
®
obtain its IP Address from a network
DHCP server.
2. You may specify any or all of the types of file servers. The one that will be used is
determined by the ServerType mode.
3. The value –default– has a special meaning: it will return that mode to the factory
default value.
4. “named servers” are available on software versions 6.10 and later. The 3 modes
SloppiIP, AlternateSloppiIP and QFXServer which are the host, host backup and
demoserve
5. a name of up to 12 characters or the IP Address.
6. A complete UnitConfig AMLCD mode table is shown in fig 12A. This file is printed
as a text file from the UnitConfig “SaveToFile” command. Fig 12B shows a VFD
mode table.