User manual

ScanVue5
®
Mini Kiosk
User Manual
M37574–01T
Industrial Electronic Engineers, Inc.
23-June-2008 Rev T Page 21
Figure 9—Configuration Status Screen 1
Figure 10—Configuration Status Screen 2
Wireless Configuration Information
Three wireless radio link parameters are kept in the UnitConfig program. These
parameters are stored by the radio and give the end user a feel for the link quality and
the physical placement of the ScanVue5 unit. The 3 parameters are
Mode Content
Link Outrageous, excellent, good, fair, poor (quality of link in 1 of 5 categories)
Level -256 dBM (signal level in dBM, lower number is better)
Noise -136 dBM (noise level in dBM, higher number is better)
UnitConfig Program
Configuring ScanVue5
®
units over the network requires a GUI program called Unit
Configuration which is installed from the CD–ROM. Generally, configuration by special
barcode is kept for those occasions when a devices network configuration is incompatible
with the local network. Changes can be made off–line that will allow the unit to connect to
the network, just like the ‘Quickstart Guide”, but without needing the PC. Appendix B