User manual

ScanVue5
®
Mini Kiosk
User Manual
M37574–01T
Industrial Electronic Engineers, Inc.
23-June-2008 Rev T Page 16
Figure 8—Wiring a Serial Printer
Connecting To the USB Port
A Type I, USB 1.0 port is available on the rear panel. The USB port does not provide
power to the load device. Any standard USB cable will connect this port to a device
such as a printer. The LX800 has three sockets, the one closest to the motherboard is
NOT connected electrically; it is there for spacing only.
The USB port is currently used to connect an external Magnetic Stripe Reader (MSR).
See the section under Port3Configuration for more details.
Wiring Precautions
While ScanVue5
®
is designed to withstand power and data line surges, spikes and other
anomalies in accordance with IEC and CE specifications, it will probably not survive a
direct lightning strike. In parts of the USA and worldwide where there is a high likelihood
of thunderstorm activity it is good practice to install lightning surge protectors on all
power and data lines. ScanVue5
®
should be treated like any other network and
computer product installed in your facility.
Power supply
provided with
ScanVue5
Serial
Printer
Y Cable
Part No. 38094
or 38254
DB9 female
connector