User manual

ScanVue5® Mini Kiosk
User Manual
M37574–01T
Industrial Electronic Engineers, Inc.
23-June-2008 RevT Page 100
Change history
Date Page Change
4/27/01 47 Replaced backplate bracket dwg with later revision
4/27/01 24 Added explanation to TextHPos command
4/27/01 5 Changed length of extender cable to 6’ and made it an accessory
5/3/01 34 Added rule 7. FTP server must be set to binary mode.
5/3/01 i Added patent # to cover sheet
5/14/01 25 Added FlashHash to Misc. Modes
5/14/01 25/26 Added UnitStatus to Misc Modes
5/17/01 36
In Slideshow section changed QVGA directory to ROOT_DIR
6/8/01 1 Changed rev to D and S/W version to 3.14 in Introduction
6/8/01 11 New section: ScanVue Software Updates
6/8/01 15 Added desc of internal failures
7/6/01 36 Added CAUTION regarding image sticking
7/6/01 36 Removed references to slide transitions in overview and rules
7/6/01 9 Added section on RF installation
7/17/01 Moved section on diagnostics
7/18/01 24 Added 2 modes SMB protocol for Wireless RF operation
8/6/01 5/6 Changed Pole/Column mounting description
8/9/01 39 Changed seconds to ticks, defined FRAME
8/9/01 27 FTP Server–add note about not applicable to Linux
8/9/01 28 USER1 added “up to 255 characters”
8/21/01 44
Moved old Appendix F “mounting brackets” to end, now Appendix
H renumbered figs.
8/21/01 43 Added new Appendix F “convert to RF Operation
8/22/01 27 Added description of EventStart/EventEnd re buttons
8/24/01 26 Added new modes; diversity and wireless
8/24/01 42
Added barcode labels DNxxx..;NNlss..;WNnn..;ASnn..
9/10/01 33 Added footnote superscripts tp commands
10/5/01 33 Added new barcode labels info screen display and safe reboots
11/07/01 iii Added RF card on “standards certification” page
11/07/01 32–34 Revised barcode configuration section.