METROLOGIC INSTRUMENTS, INC.
Copyright © 2008 by Metrologic Instruments, Inc. All rights reserved. No part of this work may be reproduced, transmitted, or stored in any form or by any means without prior written consent, except by reviewer, who may quote brief passages in a review, or provided for in the Copyright Act of 1976. Trademarks Metrologic is a registered trademark of Metrologic Instruments, Inc. Products identified in this document are hereby acknowledged as trademarks, registered or otherwise, of Metrologic Instruments, Inc.
TABLE OF CONTENTS IMPORTANT NOTES - BEFORE YOU START ................................................................. 1 Important Bar Codes Scale Save Data Bar Code .................................................................... 2 Scale Type Bar Code ............................................................................. 2 SCALE/LOAD CELL CONFIGURATION BAR CODES Single or Dual Cable Scale Configuration Bar Codes Unit Configuration (Pounds) ........................................................
TABLE OF CONTENTS Single Cable Scanner Protocols for P.O.S. Compatibility MSS Global .......................................................................................... 27 ISS45 ................................................................................................... 28 OPOS................................................................................................... 29 Retailix / NCR.......................................................................................
TABLE OF CONTENTS Auxiliary Port StratosSCHOOL™............................................................................... 61 Quick Start for a Secondary Metrologic Scanner ................................. 62 EAS Bar Codes EAS Device Types ............................................................................... 64 EAS Timeout ........................................................................................ 67 EAS Connection..................................................................
IMPORTANT NOTES - BEFORE YOU START It is important to read carefully the notes marked with a symbol on the pages contained in this manual. Not all configuration codes are designed to be used for both a single and dual cable scanner/scale system. Many of the configuration bar codes require additional steps before the unit can be configured and placed into service. Most of the bar codes in this addendum were designed to be used with a Stratos model that includes a scale.
IMPORTANT NOTES - BEFORE YOU START Important Bar Codes Scale Save Data Bar Code. The Scale Save Data bar code must be scanned last to “save” the changes in the scale’s memory. The scale will then reset and begin normal operation. This is required only for scale configuration items – not for calibration. Scale Save Data ³ 9 9 6 0 4 5 Scale Type Bar Code. The Stratos scanner should have been already programmed to recognize the type K Diva scale.
SCALE/LOAD CELL CONFIGURATION BAR CODES Single or Dual Cable Scale Configuration Bar Codes Unit Configuration (Pounds) For Kilogram weight units see page 4. The following bar codes can be used to configure a Single or Dual Cable MS2xx0. If the MS2xx0 is currently in a Dual Cable configuration, temporarily disconnect the Scale to Host cable prior to configuring the scale. The MS2xx0 must be in scale service mode to use these bar codes.
SCALE/LOAD CELL CONFIGURATION BAR CODES Single or Dual Cable Scale Configuration Bar Codes Unit Configuration (Kilograms) For Pound weight units see page 3. The following bar codes can be used to configure a Single or Dual Cable MS2xx0. If the MS2xx0 is currently in a Dual Cable configuration, temporarily disconnect the Scale to Host cable prior to configuring the scale. The MS2xx0 must be in scale service mode to use these bar codes.
SCALE CONFIGURATION BAR CODES Single or Dual Cable Scale Configuration Bar Codes Pole Display Configuration The following bar codes can be used to configure a Single or Dual Cable MS2xx0. If the MS2xx0 is currently in a Dual Cable configuration, temporarily disconnect the Scale to Host cable prior to configuring the scale. The MS2xx0 does not need to be in scale service mode. The Scale Save Data bar code must be scanned last to save the changed configuration (see page 2).
SCALE CONFIGURATION BAR CODES Single or Dual Cable Scale Configuration Bar Codes Pole Display Configuration The following bar codes can be used to configure a Single or Dual Cable MS2xx0. If the MS2xx0 is currently in a Dual Cable configuration, temporarily disconnect the Scale to Host cable prior to configuring the scale. The MS2xx0 does not need to be in scale service mode. The Scale Save Data bar code must be scanned last to save the changed configuration (see page 2).
SCALE CONFIGURATION BAR CODES Single or Dual Cable Scale Configuration Bar Codes Scale Settling Filter Configuration The following bar codes can be used to configure a Single or Dual Cable MS2xx0. If the MS2xx0 is currently in a Dual Cable configuration, temporarily disconnect the Scale to Host cable prior to configuring the scale. The MS2xx0 does not need to be in scale service mode. The Scale Save Data bar code must be scanned last to save the changed configuration (see page 2).
SCALE CONFIGURATION BAR CODES Single or Dual Cable Scale Configuration Bar Codes Scale Settling Filter Configuration The following bar codes can be used to configure a Single or Dual Cable MS2xx0. If the MS2xx0 is currently in a Dual Cable configuration, temporarily disconnect the Scale to Host cable prior to configuring the scale. The MS2xx0 does not need to be in scale service mode. The Scale Save Data bar code must be scanned last to save the changed configuration (see page 2).
SCALE CONFIGURATION BAR CODES Single or Dual Cable Scale Configuration Bar Codes Scale Internal Beeper The following bar codes can be used to configure a Single or Dual Cable MS2xx0. If the MS2xx0 is currently in a Dual Cable configuration, temporarily disconnect the Scale to Host cable prior to configuring the scale. The MS2xx0 does not need to be in scale service mode. The Scale Save Data bar code must be scanned last to save the changed configuration (see page 2).
SCALE CONFIGURATION BAR CODES Single or Dual Cable Scale Configuration Bar Codes Zero Cursor The following bar codes can be used to configure a Single or Dual Cable MS2xx0. If the MS2xx0 is currently in a Dual Cable configuration, temporarily disconnect the Scale to Host cable prior to configuring the scale. The MS2xx0 does not need to be in scale service mode. The Scale Save Data bar code must be scanned last to save the changed configuration (see page 2).
SCALE CONFIGURATION BAR CODES Single or Dual Cable Scale Configuration Bar Codes Quantitative Separator The following bar codes can be used to configure a Single or Dual Cable MS2xx0. If the MS2xx0 is currently in a Dual Cable configuration, temporarily disconnect the Scale to Host cable prior to configuring the scale. The MS2xx0 does not need to be in scale service mode. The Scale Save Data bar code must be scanned last to save the changed configuration (see page 2).
SCALE CONFIGURATION BAR CODES Dual Cable Scale Configuration Bar Codes Scale Protocols The following bar codes will change scale parameters intended for a Dual Cable environment. To place the scanner in Dual Cable mode, please refer to page 24. If the MS2xx0 is currently in a Dual Cable configuration, temporarily disconnect the Scale to Host cable prior to configuring the scale. The MS2xx0 does not need to be in scale service mode.
SCALE CONFIGURATION BAR CODES Dual Cable Scale Configuration Bar Codes Scale Protocols The following bar codes will change scale parameters intended for a Dual Cable environment. To place the scanner in Dual Cable mode, please refer to page 24. If the MS2xx0 is currently in a Dual Cable configuration, temporarily disconnect the Scale to Host cable prior to configuring the scale. The MS2xx0 does not need to be in scale service mode.
SCALE CONFIGURATION BAR CODES Dual Cable Scale Configuration Bar Codes Scale Protocols The following bar codes will change scale parameters intended for a Dual Cable environment. To place the scanner in Dual Cable mode, please refer to page 24. If the MS2xx0 is currently in a Dual Cable configuration, temporarily disconnect the Scale to Host cable prior to configuring the scale. The MS2xx0 does not need to be in scale service mode.
SCALE CONFIGURATION BAR CODES Dual Cable Scale Configuration Bar Codes Scale Protocols The following bar codes will change scale parameters intended for a Dual Cable environment. To place the scanner in Dual Cable mode, please refer to page 24. If the MS2xx0 is currently in a Dual Cable configuration, temporarily disconnect the Scale to Host cable prior to configuring the scale. The MS2xx0 does not need to be in scale service mode.
SCALE CONFIGURATION BAR CODES Dual Cable Scale Configuration Bar Codes Scale Protocols The following bar codes will change scale parameters intended for a Dual Cable environment. To place the scanner in Dual Cable mode, please refer to page 24. If the MS2xx0 is currently in a Dual Cable configuration, temporarily disconnect the Scale to Host cable prior to configuring the scale. The MS2xx0 does not need to be in scale service mode.
SCALE CONFIGURATION BAR CODES Dual Cable Scale Configuration Bar Codes Scale Protocols The following bar codes will change scale parameters intended for a Dual Cable environment. To place the scanner in Dual Cable mode, please refer to page 24. If the MS2xx0 is currently in a Dual Cable configuration, temporarily disconnect the Scale to Host cable prior to configuring the scale. The MS2xx0 does not need to be in scale service mode.
SCALE CONFIGURATION BAR CODES Dual Cable Scale Configuration Bar Codes COM Port Settings (Baud Rate) The following bar codes will change scale parameters intended for a Dual Cable environment. If a Scale Protocol bar code from page 12 to 17 is used, the bar codes below must be scanned after the Scale Protocol bar code in order to be effective. If the MS2xx0 is currently in a Dual Cable configuration, temporarily disconnect the Scale to Host cable prior to configuring the scale.
SCALE CONFIGURATION BAR CODES Dual Cable Scale Configuration Bar Codes COM Port Settings (Baud Rate) The following bar codes will change scale parameters intended for a Dual Cable environment. If a Scale Protocol bar code from page 12 to 17 is used, the bar codes below must be scanned after the Scale Protocol bar code in order to be effective. If the MS2xx0 is currently in a Dual Cable configuration, temporarily disconnect the Scale to Host cable prior to configuring the scale.
SCALE CONFIGURATION BAR CODES Dual Cable Scale Configuration Bar Codes COM Port Settings (Data Bits & Parity) The following bar codes will change scale parameters intended for a Dual Cable environment. If a Scale Protocol bar code from page 12 to 17 is used, the bar codes below must be scanned after the Scale Protocol bar code in order to be effective. If the MS2xx0 is currently in a Dual Cable configuration, temporarily disconnect the Scale to Host cable prior to configuring the scale.
SCALE CONFIGURATION BAR CODES Dual Cable Scale Configuration Bar Codes COM Port Settings (Data Bits & Parity) The following bar codes will change scale parameters intended for a Dual Cable environment. If a Scale Protocol bar code from page 12 to 17 is used, the bar codes below must be scanned after the Scale Protocol bar code in order to be effective. If the MS2xx0 is currently in a Dual Cable configuration, temporarily disconnect the Scale to Host cable prior to configuring the scale.
SCALE CONFIGURATION BAR CODES Dual Cable Scale Configuration Bar Codes COM Port Settings (Data Bits & Parity) The following bar codes will change scale parameters intended for a Dual Cable environment. If a Scale Protocol bar code from page 12 to 17 is used, the bar codes below must be scanned after the Scale Protocol bar code in order to be effective. If the MS2xx0 is currently in a Dual Cable configuration, temporarily disconnect the Scale to Host cable prior to configuring the scale.
SCALE CONFIGURATION BAR CODES Single Cable Scale Configuration Bar Codes Set Scale for Single Cable Communication If the MS2xx0 is currently in a Dual Cable configuration, disconnect and remove the Scale to Host cable prior to configuring the scale. The MS2xx0 does not need to be in scale service mode. The Scale Save Data bar code must be scanned last to save the changed configuration (see page 2).
SCANNER CONFIGURATION BAR CODES Dual Cable Scanner Configuration Bar Codes Dual Cable Scanner Mode The following bar codes can be used to place, as well as configure, the scanner in Dual Cable mode. The MS2xx0 does not need to be in scale service mode to use the following bar codes. Scanner = Dual Cable Mode ³ 9 9 9 9 5 3 Places the scanner in Dual Cable mode. In a dual cable environment, the scanner and scale work independently.
SCANNER CONFIGURATION BAR CODES Dual Cable Scanner Configuration Bar Codes Various Dual Cable Scanner Mode The following bar codes can be used to configure a Dual Cable MS2xx0. The following codes do not require that the MS2xx0 to be in scale program mode.
SCANNER CONFIGURATION BAR CODES Dual Cable Scanner Configuration Bar Codes IBM 3rd Generation 46xx and IBM OEM Full Speed USB The following bar codes can be used to configure a Dual Cable MS2xx0. The following codes do not require that the MS2xx0 to be in scale service mode. IBM 3rd Generation Communication ³ 9 9 9 9 5 2 IBM OEM Full Speed USB Communication Defaults ³ 9 9 9 9 7 When scanned the Stratos will operate as a table top scanner only. Terminal configuration, IBM 4690.
SCANNER CONFIGURATION BAR CODES Single Cable Protocols for POS Compatibility MSS Global The following bar codes can be used to configure a Single Cable MS2xx0. The following codes do not require that the MS2xx0 to be in scale service mode.
SCANNER CONFIGURATION BAR CODES Single Cable Protocols for POS Compatibility ISS45 The following bar codes can be used to configure a Single Cable MS2xx0. The following codes do not require that the MS2xx0 to be in scale service mode.
SCANNER CONFIGURATION BAR CODES Single Cable Protocols for POS Compatibility OPOS The following bar codes can be used to configure a Single Cable MS2xx0. The following codes do not require that the MS2xx0 to be in scale service mode.
SCANNER CONFIGURATION BAR CODES Single Cable Protocols for POS Compatibility Retailix/NCR The following bar codes can be used to configure a Single Cable MS2xx0. The following codes do not require that the MS2xx0 to be in scale service mode.
SCANNER CONFIGURATION BAR CODES Single Cable Protocols for POS Compatibility Retailix/OPOS The following bar codes can be used to configure a Single Cable MS2xx0. The following codes do not require that the MS2xx0 to be in scale service mode.
SCANNER CONFIGURATION BAR CODES Single Cable Protocols for POS Compatibility IT Retail The following bar codes can be used to configure a Single Cable MS2xx0. The following codes do not require that the MS2xx0 to be in scale service mode.
SCANNER CONFIGURATION BAR CODES Single Cable Protocols for POS Compatibility IBM Self Checkout System The following bar codes can be used to configure a Single Cable MS2xx0. The following codes do not require that the MS2xx0 to be in scale program mode.
SCANNER CONFIGURATION BAR CODES Single Cable Protocols for POS Compatibility Various RS232 Single Cable Codes The following bar codes can be used to configure a Single Cable MS2xx0. The following codes do not require that the MS2xx0 to be in scale program mode.
SCANNER CONFIGURATION BAR CODES Single Cable Protocols for POS Compatibility IBM 3rd Generation 46xx The following bar codes can be used to configure a Single Cable MS2xx0. The following codes do not require that the MS2xx0 to be in scale service mode. IBM 3rd Generation 46xx, † English ³ † 9 9 9 9 6 Scanner/Scale Single Cable IBM 46xx†, RS485, English (lbs.) 0 Terminal Configuration, IBM 4690.
SCANNER CONFIGURATION BAR CODES Single Cable Protocols for POS Compatibility IBM OEM Full Speed USB The following bar codes can be used to configure a Single Cable MS2xx0. The following codes do not require that the MS2xx0 to be in scale service mode. IBM OEM Full Speed USB, English ³ 9 9 9 9 6 2 IBM OEM Full Speed USB, Metric ³ 9 9 9 9 6 Table Top Scanner/Scale Single Cable, IBM OEM Full Speed USB, 4-Digit Weight Mode, English (lbs.
SCANNER CONFIGURATION BAR CODES Additional POS Data Formatting Full Speed USB Table Top/Handheld The following codes do not require that the MS2xx0 to be in scale service mode. Scanner 4B Handheld ³ 3 1 6 4 3 0 Scanner 4A Flatbed ³ 37 3 1 6 4 1 Full Speed USB interface to 4B00h handheld usage. 0 Full Speed USB interface to 4A00h table top usage.
SCANNER CONFIGURATION BAR CODES Additional POS Data Formatting Full Speed USB Table Top/Handheld The following codes do not require that the MS2xx0 to be in scale service mode. Scanner/Scale 4A/6E Table Top Full Speed USB interface to the 4A00h/6E00h table top scanner/scale usage. This option is only compatible with Stratos models that have a scale.
SCANNER CONFIGURATION BAR CODES Additional POS Data Formatting Special Function ACK The following codes do not require that the MS2xx0 to be in scale service mode. Enable Special Function ACK Answer ³ 1 4 1 7 1 Answer simple special functions with ACK.
SCANNER CONFIGURATION BAR CODES Additional POS Data Formatting Prefix/Suffix The following codes do not require that the MS2xx0 to be in scale service mode. Use Protocol Prefix/Suffix ³ 1 4 1 7 1 Add protocol prefixes and suffixes to the bar code.
SCANNER CONFIGURATION BAR CODES Additional POS Data Formatting 3x-30 Acknowledge Responses The following codes do not require that the MS2xx0 to be in scale service mode. No 3x-30 Answer ³ 1 4 1 7 1 0 *3x-30 Answer ³ 41 1 4 1 7 0 This bar code will inhibit all ‘simple acknowledge’ (3x-30) answers to POS or OPOS commands. The scanner will answer all NCR and OPOS commands that require a 3x-30 acknowledgement.
SCANNER CONFIGURATION BAR CODES Additional POS Data Formatting Special Function Command Responses The following codes do not require that the MS2xx0 to be in scale service mode. Spec Func Ans 3x30 ³ 1 4 1 9 1 4 *Spec Func Ans Ack ³ 1 4 1 9 0 Answer Special Function commands in the 3x-30 format as opposed to the Ack / Nak which is the norm. 4 Answer Special Function commands in the Ack / Nak format.
SCANNER CONFIGURATION BAR CODES Additional POS Data Formatting Special Function Command Responses The following codes do not require that the MS2xx0 to be in scale program mode. Spec Func 30-30 Status Returns Special Function commands in the 30-30 status as opposed to the 33-30 status. Note: Requires ‘Spec Func Ans 3x-30’ on page Error! Bookmark not defined. to be set.
SCANNER CONFIGURATION BAR CODES Additional POS Data Formatting Special Function Command Responses The following codes do not require that the MS2xx0 to be in scale program mode. No Command Reject Answer ³ 1 4 2 1 1 7 *Send Command Reject Answer ³ 1 4 2 1 0 This bar code will ignore sending a command reject answer to the POS mode. 7 This bar code will send command reject answer to the POS if the command is rejected by the scanner.
SCANNER CONFIGURATION BAR CODES Additional POS Data Formatting Special Function Command Responses The following codes do not require that the MS2xx0 to be in scale program mode. No Spec Func Answer ³ 1 4 2 1 1 6 *Spec Func Answer ³ 45 1 4 2 1 0 This bar code will ignore sending a special function response answer in POS mode. 6 This bar code will send a special function response answer to the POS.
SCANNER CONFIGURATION BAR CODES Additional POS Data Formatting BCC in POS communications The following codes do not require that the MS2xx0 to be in scale service mode. Skip BCC in messages ³ 1 4 1 4 1 0 *Add BCC in messages ³ 1 4 1 4 0 This bar code will tell the scanner to NOT expect or transmit the Block Check Character in all message transmissions.. 0 The scanner will expect and answer all messages with the Block Check Character included.
SCANNER CONFIGURATION BAR CODES Additional POS Data Formatting 3 Scale Status Bytes The following codes do not require that the MS2xx0 to be in scale service mode. Enable 3 Scale Status Bytes ³ 1 2 4 8 1 3 Disable 3 Scale Status Bytes ³ 47 1 2 4 8 0 3 Required for applications where the host system display is the primary scale display and there is no remote pole display connected directly to the scanner/scale unit.
SCANNER CONFIGURATION BAR CODES Additional POS Data Formatting Scale Options The following codes do not require that the MS2xx0 to be in scale service mode. Sets the English Mode weight to 5-digits, as in xx.yyy pounds. 5-Digit Weight ³ 1 4 1 0 1 0 In order to work properly, this bar code must be scanned AFTER scanning one of the English configuration bar codes found on pages 27 - 36. Scan the No Scale bar code: 1. No Scale 2.
SCANNER CONFIGURATION BAR CODES Additional POS Data Formatting Remote Display The following codes do not require that the MS2xx0 to be in scale service mode. No Remote Display ³ 1 4 0 9 0 2 Add remote display to the scanner’s memory. Remote Display ³ 49 1 4 0 9 1 When no remote display is installed, scan the No Remote Display bar code AFTER scanning one of the configuration bar codes found on pages 27 - 36 to remove the scale’s display from the scanner memory.
SCANNER CONFIGURATION BAR CODES Additional POS Data Formatting StratosSTATS The following codes do not require that the MS2xx0 to be in scale service mode. Activate StratosSTATS ³ 9 9 7 0 1 7 This bar code sets: a. StratosSTATS bar code data formatting active. b. Bar code Attempt Interval to 0.5 seconds. c. Time to find supplements (code 128) to 0.3 seconds. Use StratosSTATS monitor to test this output format.
SCANNER CONFIGURATION BAR CODES Additional POS Data Formatting StratosSTATS The following codes do not require that the MS2xx0 to be in scale program mode. Do not scan these bar codes unless instructed by a Metrologic Representative. Allows non-RS232 interfaces transmit normally without StratosSTATS and concurrently RS232 interfaces transmit with StratosSTATS.
SCANNER CONFIGURATION BAR CODES Additional POS Data Formatting StratosSTATS The following codes do not require that the MS2xx0 to be in scale program mode. Do not scan these bar codes unless instructed by a Metrologic Representative. Dual Xmit Carriage Return ³ 1 3 8 5 1 2 *No Dual Xmit Carriage Return ³ 1 3 8 5 0 This bar code enables a secondary carriage return suffix to be used only for the dual StratosSTATS RS232 transmission. 2 Resets StratsSTATS RS232 dual transmission suffix.
SCANNER CONFIGURATION BAR CODES Additional POS Related Functions Scanner Beep on Weight Sent The following codes do not require that the MS2xx0 to be in scale service mode. Request scanner beep when a successful weight is sent. This code should only be used for ‘weight on demand’ applications. If used with periodic weight request applications, the beeper will be continuously active (ON). Beep on Weight ³ 1 4 1 9 1 7 *Disable Beep on Weight ³ 53 1 4 1 9 0 When no beep on weight is desired.
SCANNER CONFIGURATION BAR CODES Additional POS Related Functions Restrict In-Store Codes The following codes do not require that the MS2xx0 to be in scale program mode. Restrict In-Store Codes This bar code places tighter restrictions on in-store codes. These codes are: EAN13 Sys2 UPCA Sys2 and Sys4 ³ 1 2 5 8 1 0 *No Restrict In-Store Codes ³ 1 2 5 8 0 Disable restrictions on in-store codes.
SCANNER CONFIGURATION BAR CODES Additional POS Related Functions Scale Shadow Mode The following codes do not require that the MS2xx0 to be in scale program mode. Scale Shadow Mode This bar code sets the scale to the highest priority to allow for frequent scale - POS commands. This bar code is only to be used in single cable scale mode. ³ 1 4 2 2 1 7 *No Scale Shadow Mode ³ 1 4 2 2 0 Disables the Scale Shadow Mode.
SCANNER CONFIGURATION BAR CODES Additional POS Related Functions Scanner Razz on Not-On-File The following codes do not require that the MS2xx0 to be in scale program mode. Razz on Not-On-File ³ 1 4 2 1 1 5 *Beep on Not-On-File ³ 1 4 2 1 0 This bar code changes the audible to a razz signal when a Not-On-File command is received. This bar code restores the beep as the NotOn-File audible.
SCANNER CONFIGURATION BAR CODES Additional Scanner Configuration Bar Codes Horizontal Depth of Field The following codes do not require that the MS2xx0 to be in scale program mode. Do not scan these bar codes unless instructed by a Metrologic Representative. *Horizontal High DOF ³ 2 1 8 7 0 2 Horizontal Medium DOF ³ 57 2 1 8 7 1 2 This bar code sets the DOF for all horizontal laser channels to High DOF, which allows the farthest scanning.
SCANNER CONFIGURATION BAR CODES Additional Scanner Configuration Bar Codes Horizontal Depth of Field The following codes do not require that the MS2xx0 to be in scale program mode. Do not scan these bar codes unless instructed by a Metrologic Representative. Horizontal Close DOF ³ 2 1 8 7 2 2 Horizontal Ultra Close DOF ³ 2 1 8 7 3 This bar code sets the DOF for all horizontal laser channels to Close DOF. This bar code sets the DOF for all horizontal laser channels to Ultra Close DOF.
SCANNER CONFIGURATION BAR CODES Additional Scanner Configuration Bar Codes Vertical Depth of Field The following codes do not require that the MS2xx0 to be in scale program mode. Do not scan these bar codes unless instructed by a Metrologic Representative. *Vertical High DOF ³ 2 1 8 7 0 0 Vertical Medium DOF ³ 59 2 1 8 7 1 0 This bar code sets the DOF for the vertical laser channels to High DOF, which allows the farthest scanning.
SCANNER CONFIGURATION BAR CODES Additional Scanner Configuration Bar Codes Vertical Depth of Field The following codes do not require that the MS2xx0 to be in scale program mode. Do not scan these bar codes unless instructed by a Metrologic Representative. Vertical Close DOF ³ 2 1 8 7 2 0 Vertical Ultra Close DOF ³ 2 1 8 7 3 This bar code sets the DOF for the vertical laser channels to Close DOF. This bar code sets the DOF for vertical laser channels to Ultra Close DOF.
SCANNER CONFIGURATION BAR CODES Auxiliary Port StratosSCHOOL™ The following codes do not require that the MS2xx0 to be in scale service mode. Auxiliary History Report ³ 9 9 7 0 1 1 The Auxiliary port may be used to download or clear data to StratosSCHOOL™. The two commands that can be used are Upload Scanner Data and Clear Scanner Data within the Serial Program Interface box on the StratosSCHOOL™ screen. Auxiliary Program Cable (MLPN 57-57008x-N-3) is required for this feature.
SCANNER CONFIGURATION BAR CODES Auxiliary Port Quick Start for a Secondary Metrologic Scanner The following codes do not require that the MS2xx0 to be in scale service mode. STEP 1 Use the Stratos to scan the following bar code. This bar code will configure the Stratos’ auxiliary port to accept a Metrologic scanner as the secondary scanner.
SCANNER CONFIGURATION BAR CODES Auxiliary Port Quick Start for a Secondary Metrologic Scanner Configuration sequence continued from previous page.
SCANNER CONFIGURATION BAR CODES EAS Bar Codes EAS Device Types The following codes do not require that the MS2xx0 to be in scale program mode. *No EAS Device ³ 3 3 7 2 0 No EAS device is connected.
SCANNER CONFIGURATION BAR CODES EAS Bar Codes EAS Device Types The following codes do not require that the MS2xx0 to be in scale program mode.
SCANNER CONFIGURATION BAR CODES EAS Bar Codes EAS Device Types The following codes do not require that the MS2xx0 to be in scale program mode.
SCANNER CONFIGURATION BAR CODES EAS Bar Codes EAS Timeout The following codes do not require that the MS2xx0 to be in scale program mode.
SCANNER CONFIGURATION BAR CODES EAS Bar Codes EAS Timeout The following codes do not require that the MS2xx0 to be in scale program mode.
SCANNER CONFIGURATION BAR CODES EAS Bar Codes EAS Timeout The following codes do not require that the MS2xx0 to be in scale program mode.
SCANNER CONFIGURATION BAR CODES EAS Bar Codes EAS Timeout The following codes do not require that the MS2xx0 to be in scale program mode.
SCANNER CONFIGURATION BAR CODES EAS Bar Codes EAS Timeout The following codes do not require that the MS2xx0 to be in scale program mode.
SCANNER CONFIGURATION BAR CODES EAS Bar Codes EAS Connection The following codes do not require that the MS2xx0 to be in scale program mode. *EAS Digital Aux Port ³ 1 4 6 1 0 0 EAS Digital Host Port ³ 1 4 6 1 1 The EAS signals use the RTS and CTS line of the Auxiliary RS232 In connector. * Factory Default Setting The EAS signals use the RTS and CTS lines of the scanner RS232 to Host connector.
SCANNER CONFIGURATION BAR CODES EAS Bar Codes EAS Connection The following codes do not require that the MS2xx0 to be in scale program mode. EAS RS232 on Aux Port ³ 1 4 6 1 1 1 *No EAS RS232 on Aux Port ³ 73 1 4 6 1 0 This bar code allows the EAS RS232 signal to use the Tx Out and Rx In lines of the scanner to Aux RS232 In connector. 1 There is no EAS RS232 signal (Tx Out and Rx In) used on the scanner Aux RS232 In connector.
SCANNER CONFIGURATION BAR CODES EAS Bar Codes EAS Connection The following codes do not require that the MS2xx0 to be in scale program mode. EAS RS232 on Host Port ³ 1 4 6 1 1 2 *No EAS RS232 on Host Port ³ 1 4 6 1 0 This bar code allows the EAS RS232 signal to use the Tx Out and Rx In lines of the scanner to Host RS232 In connector. 2 There is no EAS RS232 signal (Tx Out and Rx In) used on the scanner to Host RS232 In connector.
SCANNER CONFIGURATION BAR CODES EAS Bar Codes Continuous Mode The following codes do not require that the MS2xx0 to be in scale program mode. EAS Continuous Mode ³ 1 4 6 1 1 5 *EAS Interlock Mode ³ 1 4 6 1 0 When in continuous mode and the scanner is enabled, the EAS will always be online to deactivate an EAS tag. This bar code establishes EAS is used in the Interlocked mode.
SCANNER CONFIGURATION BAR CODES EAS Bar Codes EAS Deactivation The following codes do not require that the MS2xx0 to be in scale program mode. Blink Scan LED on Deactivation ³ 1 4 6 1 1 3 *No Blink LED on Deactivation ³ 1 4 6 1 0 The scanner will blink the scan LED upon receipt of an EAS deactivate acknowledge signal. Do not blink the scan LED upon receipt of an EAS deactivate acknowledge signal.
SCANNER CONFIGURATION BAR CODES EAS Bar Codes EAS Deactivation The following codes do not require that the MS2xx0 to be in scale program mode. Fast Beep on Deactivation ³ 1 4 6 1 1 4 *No Beep on Deactivation ³ 77 1 4 6 1 0 Fast beep the scanner’s beeper receipt of an EAS deactivate acknowledge signal. 4 Do not fast beep the scanner’s beeper receipt of an EAS deactivate acknowledge signal.
SCANNER CONFIGURATION BAR CODES EAS Bar Codes EAS Deactivation The following codes do not require that the MS2xx0 to be in scale program mode. Volume Switch = Manual ³ 1 4 6 1 1 6 *Volume Switch = Normal ³ 1 4 6 1 0 The volume switch is used for manual EAS deactivation switch. Volume switch is used for normal volume function.
SCANNER CONFIGURATION BAR CODES EAS Bar Codes Sensormatic ScanMax Pro The following codes do not require that the MS2xx0 to be in scale program mode. The RS232 EAS cable must be connected to one of the RS232 scanner ports. For Sensormatic ScanMax Pro, get EAS’s deactivation count and transmit the information over the current scanner interface.
SCANNER CONFIGURATION BAR CODES EAS Bar Codes Sensormatic ScanMax Pro The following codes do not require that the MS2xx0 to be in scale program mode. The RS232 EAS cable must be connected to one of the RS232 scanner ports. For Sensormatic ScanMax Pro, get EAS’s hardware version, software version, and serial number and transmit the information over the current scanner interface. EAS Function #3 ³ 9 9 8 0 6 7 ScanMax RS232 Defaults ³ 9 9 9 9 0 For Sensormatic ScanMax Pro, RS232 default setup.
SCANNER TEST BAR CODES Supplemental Tests Display Software Numbers The following codes do not require that the MS2xx0 to be in scale service mode. These codes are for test purposes only. The following code will display software #’s on the 2-digit diagnostic display. The lasers will be turned off while the numbers are being displayed. The first number is the main decode processor software number. The second number is the I/O processor’s software number.
82
NOTES
NOTES
May 2008 Printed in the USA 00 - 02272C
