METROLOGIC INSTRUMENTS, INC.
Copyright © 2006 by Metrologic Instruments, Inc. All rights reserved. No part of this work may be reproduced, transmitted, or stored in any form or by any means without prior written consent, except by reviewer, who may quote brief passages in a review, or provided for in the Copyright Act of 1976. Products and brand names mentioned in this document are trademarks of their respective companies.
Table of Contents Introduction Product Overview .......................................................................................................................4 Scanner and Accessories...........................................................................................................4 General Features and Characteristics Multifunctional Keypad ...............................................................................................................7 The LCD Screen .......................
3
Introduction Product Overview The SP5600 OptimusR Portable Data Terminals are robust and versatile scanning devices designed to provide exceptional performance, while enduring the demands of everyday use. The rugged exterior of the OptimusR make it the ideal PDT for applications that take place in more rigorous environments. The lithium-ion rechargeable battery provides the Optimus with more than 200 hours of operation.
General Features and Characteristics 4 6 3 5 2 7 9 1 10 8 Figure 1 Scanner Features ITEM NO.
General Features and Characteristics 4 3 2 6 1 5 Figure 2. Cradle Features ITEM NO.
General Features and Characteristics Multifunctional Keypad 5 4 6 3 7 2 8 1 9 Figure 3.Keypad Features ITEM NO. KEY NAME 1 ALPHA() 2 ALPHANUMERIC 3 ARROW 4 ESC DESCRIPTION The toggle key for Alphabet/Numeral input. When the system is in alpha-mode, a small icon will be shown in the lower right corner of the display. Each numeric key can be used to generate one of the three capital letters located on that number key. For example, numeral 2 can be used to produce A, B, or C.
General Features and Characteristics The LCD Screen The LCD screen of the OptimusR Portable Data Terminal displays program settings, operational parameters, data collected, and much more.
Installation Getting Started The OptimusR Portable Data Terminal (PDT) requires minimal effort to begin functional operation for data collection in any application. In order to get started the unit must have a fresh battery inserted into the battery compartment. 1. Access the battery compartment by removing the battery cover. To remove the cover, pull the cover release up on each side of the compartment and slide the cover away form the unit. 2.
Installation Basic Operation In order for the Optimus to operate properly, an application program must be loaded onto the PDT. It is possible for the Optimus to power up without at active application. On power up if the Optimus has no application program loaded, then the following Program Manager menu options will appear on the display: MENU OPTIONS. Download Activate Upload DESCRIPTION This option allows the user to download application programs (*.SHX), BASIC run-time (bas.ops.shx), BASIC programs (*.
Installation 3. Follow steps a, b, or c a. For the RS232 cable plug the 9 pin serial connector into a serial port on the host device. Plug the opposite end into the communication port of the cradle. b. For the USB cable plug the USB end of the cable into an appropriate communication port on the host device and the opposite end of the cable into the communication port of the cradle*. c.
Installation Data Upload 1. To transfer the data collected select the Utilities option. 2. Select the Download Method option on the next menu and then select the appropriate method for downloading files to the host device. 3. The WiFi can send data in real time, however, if cradle options (Cradle-IR or IrDA) are selected re-insert the Optimus unit into the cradle and upload the data to the host device.
Installation The System Menu The system menu on the Optimus is another useful tool included with the Optimus. It provides information about the Optimus and access to the system menu for configuring the Optimus. In order to access the system module, follow the instructions below: 1. With the Optimus powered off press down and hold the 7, 9, and power button. 2. An audible indicator will sound to indicate that the Optimus is powered on. 3. The Optimus will display the system menu.
Installation Settings SETTING Clock Backlight ON Period CPU Speed Auto Off Power On Options Key Click System Password Font Reset to Default DESCRIPTION DEFAULT Set date and time for the system. Set the duration for the keyboard/LCD backlight N/A the light goes off after 20 seconds Set CPU running speed. There are five speeds available: Full speed, half speed, quarter speed, eighth speed and sixteenth speed.
Installation Memory The menu option provides the user with ability to gather information on the amount of memory available on the Optimus, as well as the ability to initialize the memory. This is accomplished by choosing one of the two available selections. 1. Size Info. 2. Initialize Size Info. The Optimus contains two types of memory, SRAM and Flash memory. These two types of memory allow the Optimus to perform operational tasks at an optimal level.
Installation 802.11b Menu The 802.11b Menu settings will configure the OptimusR with the appropriate network and security settings for WiFi communication. 1. 2. 3. 4. 5. Information Network Set WLAN Setting Security Echo Test Modifying TCP/IP settings can affect the performance of certain devices. Contact an IT professional to ensure that modifying these settings is done correctly. Information The information setting list the current network settings of the OptimusR.
Installation Application The Application module runs on top of the System module. The OptimusR Series Portable Data Terminals are preloaded with the Optimizer’s run-time program and the following menu will be shown upon powering the unit up: Models (): 1. Run Program 2. Utilities Utilizing the arrow keys select the menu option and execute it by pressing the ENTER key.
Troubleshooting SYMPTOM DESCRIPTION Make sure the battery is inserted and charged. Does not power up after pressing POWER key. Charge the battery and check the charging status. If no charging information shown on the display, reload the battery and check if the battery is properly installed then try again. Call for service if problem persists. Check if the cable is plugged tightly into host device and cradle.
Specifications OPTIMUSR SERIES OPERATIONAL Light Source: Normal Depth of Field: Width of Scan Field: Visible Laser Diode (VLD) @ 650 nm 51 mm - 381 mm 0.33 mm (13 mil) (2"- 15") bar code 305mm (12”) @ 381 mm (15”) Single-Line Scan Speed: No. of Scan Lines: Min Bar Width: 42 scan lines per second 1 0.127 mm (5.0 mil) Decode Capability: All standard 1-D bar codes including RSS-14, RSS-Expanded, and RSS-14 Limited Print Contrast: No.
Specifications OPTIMUSR SERIES MECHANICAL Width (Unit): 81 mm (3.2") Depth (Unit): 46 mm (1.8") Height (Unit): 172 mm (6.77") Weight (Unit): 10.6 oz (300 g) – including battery Width (Cradle): 96 mm (3.8") Depth (Cradle): 106 mm (4.17") Height (Cradle): 80 mm (3.15") ELECTRICAL Battery Operation: Battery Backup: Operation: Laser Class: EMC: Li-ion 3.7V, 7.
Contact Information and Office Locations Corporate Headquarters Metrologic Instruments, Inc. 90 Coles Road Blackwood, NJ 08012-4683 Tel: 856-228-8100 Fax: 856-228-6673 (Sales) Fax: 856-228-1879 (Marketing) Fax: 856-228-0653 (Legal/Finance) Email: info@metrologic.com European, Middle East and African HQ & Germany Office Eastern Europe and Middle East Metrologic Instruments GmbH Dornierstrasse 2 82178 Puchheim Munich, Germany Tel: 49-89-89019-222 Fax: 49-89-89019-173 Email: info@east.metrologic.
Contact Information and Office Locations South America and Central America Brazil Metrologic do Brasil Ltda. Rua da Paz 2059 CEP 04713-002 Chácara Santo Antônio São Paulo, SP, Brasil Tel: 55-11-5182-8226 Fax: 55-11-5182-8315 Email: info@br.metrologic.com Outside Brazil Metrologic South America Rua da Paz 2059 CEP 04713-002 Chácara Santo Antônio São Paulo, SP, Brasil Tel: 55-11-5182-7273 Fax: 55-11-5182-7198 Email: info@sa.metrologic.
Safety Notices This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
