User manual

INSTALLATION

CABLE INSTALLATION (INTERFACE SPECIFIC)

OCIA

8. Connect AC power to the transformer. If the AC outlet is equipped with an on/off switch, turn the power on.

9. Turn on the host system.

10. Configure the StratosH to match the host system’s OCIA parameters.

Refer to the MetroSelect Configuration Guide (

MLPN 00-02407x) under Section I: OCIA for Enabling and

Setting OCIA Parameters.

xxx* Specifies international connection. See page 3 for a complete listing of power supply options and

their part numbers.

See power source caution statement on page 8 of this manual.

Figure 23. OCIA Cable Installation Schematic