- METROLOGIC INSTRUMENTS Scanner Installation and User Guide Eclipse MS5100

DISCONNECTING THE POWERLINK CABLE F ROM THE SCANNER

Before removing the cable from the scanner, Metrologic recomme nds that the

power on the host system is off and the power supply has been discon nected

from the PowerLink cable.

1. Locate the small ‘pin-hole’ on the back of the scanner.

2. Bend an ordinary pap erclip into the shape shown a bove.

3. Insert the paperclip (or other small metallic pin) into the small ‘ pin-hole’.

4. You will hear a faint ‘click’. Pull gentl y on the strain-rel i ef of the PowerLink

cable and it will slide out of the scanner.