Single-Line Laser Scan Engine Integration Guide
Table Of Contents
- IS4813, IS4815, IS4823 and IS4825
- Copyright/Trademarks
- Table Of Contents
- Introduction
- Assembly
- Mounting Specifications
- IS4813 and IS4815 Scan Engine Dimensions
- IS4823 and IS4825 Bracketed (-1 and -2) Dimensions
- IS4823 and IS4825 (-0) Decode Printed Circuit Board Dimensions
- Exit Beam Specifications
- Enclosure Specifications
- Electrostatic Discharge (ESD) Cautions
- Grounding
- Power Supply
- Power Sequencing
- Flex Cables
- Thermal Considerations
- Printed Circuit Board (PCB) Component Clearance
- Magnetic Sensitivity
- Airborne Contaminants and Foreign Materials
- Beam Clearance
- Output Window Properties
- Output Window Coatings
- Output Window Angle
- Minimum Allowable Window Position RequiredTo Avoid Detrimental Internal Reflective Beam Interference at Positive Exit Beam Angle Tolerance
- Minimum Allowable Window Position Required To Avoid Detrimental Internal Reflective Beam Interference at Negative Exit Beam Angle Tolerance
- Scan Engine Field Of View And Depth Of Field
- Descriptions Of IS4823 AND IS4825 Operating Modes
- Serial Configuration Mode
- General Design Specifications
- Detailed Electrical Specifications
- Scan Engine Terminations
- Decode Printed Circuit Board Terminations
- Flex Cable Specifications And Installation Guidelines
- Timing Diagrams
- Bar Code Element Time Calculation
- Regulatory Compliance
- Limited Warranty
- Patents
- Index
- Contact Information
- MANUAL DATE CODE
3
Components of the IS4800 Engine Series
IS4813 and IS4815 Non-Decode Engine
Item Description Item Location
1 Pin Locator Holes (see page 6)
2 Threaded Mounting Points (see page 6)
3
Exit Beam Location, Laser Light Aperture
AVOID EXPOSURE! – LASER LIGHT IS
EMITTED FROM THIS APERTURE.
4 Flex Cable, 10-POS
5 ZIF Connector, 10-Pin
6 Printed Circuit Board and Shield
7 Die Cast Chassis
Figure 3. IS4813/IS4815
IS4823 and IS4825 (-0) Decode Engine Assembly
Item Description
Item Location
1 Decode Printed Circuit Board
2 ZIF Connector, 12-PIN
3 Flex Cable, 12-POS
4 Pin Locator Holes (see page 6)
5 IS4813 or IS4815 Laser Scan Engine
6
Exit Beam Location, Laser Light Aperture
AVOID EXPOSURE! – LASER LIGHT IS
EMITTED FROM THIS APERTURE.
7 Threaded Mounting Points (see page 6)
8 Flex Cable, 10-POS
Figure 4. IS4823-0/IS4825-0