Manual

1.8 Setting up an Operations Method 
NIRS Vision Tutorial – Operation  29
3. In the OM Wizard – Select DCM dialog box, click on [Next].
Define an Output Project
1. In the OM Wizard – Output Project dialog box, click on [Output
Project]
2. In the Choose Output Project dialog box, click on [New Output
Project]
3. In the Create New Output Project dialog box, enter
 Project ID “Testout”
 Click on [OK]
 If asked „Create database C:\vision\testout?“, click on [Yes]
4. In the OM Wizard – Output Project dialog box, click on [Next].
Select Reference
1. In the OM Wizard – Select Reference dialog box, click on [Next].
Set Sample Average Options
1. In the OM Wizard – Spl Average Options dialog box, set the
following:
 All samples in average enabled
 Click on [Next].
Set Diagnostic Timer
1. In the OM Wizard – Diagnostic Timer dialog box, click on [Next].
Set Save and Print Options
1. In the OM Wizard – Save & Print Options dialog box, set the
following:
 In the Save box:
Results enabled
Spectra enabled
 In the Maximum Number of… box:
leave everything unchanged
 Click on [Next]
Select the Library
1. In the OM Wizard – Select Library dialog box,
 Library xdslib
 Identify enabled
 Qualify enabled
 Click on [Next]