User guide

▪▪▪▪▪▪▪
31
4. Mounting dimensions for the enclosure feet are as shown on the following page.
The mounting bolts must be 3/8” (10mm) in size. The environment may require stainless steel
due to industry or washdown requirements.
5. Lift the instrument onto the mounting bolts, seating both upper mounting brackets first.
Enclosure Depth (front-to-back) is 14.25” (362mm)
VENT FOR
PURGE SYSTEM
Heat Sink,
Fan
19" (482.6mm)
17.5" (444.5mm)
16" (406.5mm)
0.75" (19.05mm)
1.5" (38.1mm)
0.75" (19.05mm)
24" (609.6mm)
25.5" (647.7mm)
24.75" (628.65mm)
Optional Purge
System
14.5"" (368.3mm)
24" (609.6mm)
31" (787.5mm)