User guide

6.4 819 IC Detector

IC Net 2.3

6.4 819 IC Detector

6.4.1 819 IC Detector features

The Metrohm 819 IC Detector is a conductivity detector for ion

chromatography. The associated thermostatable detector block

can be used for recording of chromatograms with and without

chemical suppression and is normally installed in the 820 IC

Separation Center. The two following versions are available:

• 2.819.0010 IC Detector with standard

detector block

• 2.819.0110 IC Detector with metal-free detector block

The 819 IC Detector is completely remote controlled and can be

operated using the «IC Net» program. The 819 IC Detector is

normally connected to the 830 IC Interface using the 6.2134.130

cable. Examples for interconnections with the 819 IC Detector can

be found in the 830 Instructions for Use.

For detailed information about the 819 IC Detector see 819/820

Instructions for Use.

6.4.2 819 IC Detector icon

The 819 icon is available in the SYSTEM window if a 819 IC Detector

has been installed with the New system wizard or by using the

Setup/New devices/Install new device option of the SYSTEM window

(see section 6.1.2).

If the system is connected and the

819 icon is clicked with the

right mouse button, the following menu appears:

Open Open the 819 IC Detector window for parameter settings

(this window can also be opened by double-clicking

the icon).

Unlink Delete the 819 icon from the system.

6.4.3 819 IC Detector window

819 icon / Open

The 819 IC Detector window for parameter settings is opened by

selecting this menu option with the right mouse button or by dou-

ble-clicking the 819 icon in the SYSTEM window. It consists of the

four tabs Display, Method parameter, Program, and Links.