User guide

6.2 Watch window

IC Net 2.3

6.1.2 Install new devices in system window

SYSTEM / Setup / New devices/ Install new device

Add new devices to the open SYSTEM window using the New

system wizard

window (see above). For every device to be added

to the system, open the group which contains this device and se-

lect the device and the serial port of the interface where the de-

vice is connected to. After clicking on <Add to system>, the device

is added to the SYSTEM window. If desired, an additional data re-

corder and a timer of the More modules group can be added to

the system.

6.1.3 Install existing devices in system window

SYSTEM / Setup / New devices/ Link to existing device

Add devices to the open SYSTEM window which

are already present on the toolbar. This is mostly

used to add the 830 IC Interface events. For every

device to be added to the system, select the de-

vice and click on <OK>.

6.1.4 Delete devices

Icon / Unlink

Devices in a SYSTEM window can be deleted by clicking on the

device icon using the right mouse button an select the Unlink

menu item.

6.2 Watch window

6.2.1 Watch window icon

The watch window icon is one of the components always pre-

sent in a new

SYSTEM window. If the system is connected and

this icon is clicked with the right mouse button, the following

menu item appears:

Open Open the WATCH WINDOW for live display of

instrument values (this window can also be

opened by double-clicking the watch win-

dow icon).

Unlink Delete the WATCH WINDOW from the SYS-

TEM

window (not recommended).