User guide

5 Interfaces

IC Net 2.3

Events configuration

On the Events configuration subtab user-defined event commands

can be defined, which can be inserted into a time program after

being activated with <Activate>.

Name (1

column) User-definable name of the event com-

mand (e.g. Start_766).

Event command (2

column)

Setting the event output lines 1…7.

Selection:

0 (line off, inactive, open)

1 (line on, active, 0 V)

p (pulse, pulse length 150 ms)

* (leave line in current status)

For entry of the first value, enter 1, 0, p or *.

For entry of the other values, move the cur-

sor in front of the value to be changed and

enter 1, 0, p or *.

<Add> Add new remote command.

<Delete> Delete selected remote command.

<Activate> Activate the defined remote commands for

insertion into the time program.