User guide

5 Interfaces

IC Net 2.3

5.3.2 830 icon on the toolbar

The 830 icon is available on the toolbar if a 830 IC Interface has

been installed with the new system wizard or by using the <Install

device>

option of the WORKPLACE window (see section 5.1.2). By

clicking this icon the 830 IC Interface window for parameter set-

tings opens.

5.3.3 830 icons in the system window

The

830 System 1 and 830 System 2 icons are available in the SYS-

TEM

window if the 830 System [1] or 830 System [2] have been in-

stalled with the Install existing devices option (see section 6.1.3).

By clicking this icon using the right mouse button, the following

menu items can be selected:

Open Open the 830 System [#] window for programming the

event output lines (this window can also be opened by

double-clicking the icon).

Unlink Delete the 830 icon from the system.

5.3.4 830 IC Interface window

830 icon / Open

The 830 IC Interface window for parameter settings is opened by

selecting this menu option with the right mouse button or by click-

ing the

830 icon on the toolbar. It consists of three tabs Init, RS set-

tings

, and Links.

Init

The

Init tab of the 830 IC Interface window contains data acquisi-

tion parameters for the 830 IC Interface.