User guide

4.3 System functions

IC Net 2.3

Save the current system file (*.smt) in the desired folder of the

Systems directory.

SYSTEM / System / Close

Close the selected system.

Delete a system

To delete an existing system, delete the *.smt file in the Systems

folder.

4.3 System functions

4.3.1 Connect and disconnect system

To make possible manual control of the system devices and start

of determinations, the selected system must be connected to the

workplace. Systems are connected and disconnected as follows:

SYSTEM / Control / Connect to workplace

Connect selected system to the workplace. Only one system from

the same system folder can be connected at the same time.

The icon appears on the toolbar. If this icon is clicked, the

SYSTEM window is always displayed in front of all other windows.

SYSTEM / Control / Disconnect from workplace

Disconnect selected system from the workplace. If a system is

disconnected, manual control is not available for this system, but

all other system settings can be modified and saved.

Start deter-

mination

and Startup hardware is only possible if no other system

from the same system folder is connected. In this case, the sys-

tem is automatically connected.

4.3.2 Start/stop hardware and record baseline

SYSTEM / Control / Startup hardware (Measure Baseline)

With this menu item the following actions are executed automati-

cally:

• Send

System startup values to the devices.

• Start Metrohm solvent delivery systems and Bischoff solvent

delivery systems.

• Start Metrohm additional modules and Bischoff additional

modules.