User guide

8 Chromatograms
IC Net 2.3
340
[Item]
TableStart = A6, Specifies the cell in the data worksheet of the
ExcelReport.xls where the header of the first col-
umn is located. Defines the position of the data
cells of the data worksheet.
For correct display of the data in the ExcelReport.xls the for-
matting of the cells has to match the containing data type. Re-
member to adjust the formatting when changing the value of
TableStart, important especially for correct display of
DateTime data.
NoItems = n, number of items that are to be displayed in the
data worksheet.
Item1 = Keyword. The Itemx entry specifies the columns of
the data worksheet. The numbering 1 – n after
Item specifies the order of the columns, the Key-
word
after = specifies what kind of data is ex-
tracted from the «IC Net» report and filled in the
columns.
Itemn = Keyword:
No
Peak number.
Retention Retention time of the component (in
minutes)
Width/2 Width of the peak at half height (in
minutes).
Height Height of the peak (in µS/cm).
Area Area of the peak.
K’ Capacity factor, ratio of corrected re-
tention time to the void time.
Resolution Resolution for two neighboring peaks
R(i,i+1).
TP Effectivity for the peak in number of
theoretical plates.
TP/m Effectivity for the peak in number of
theoretical plates per meter.
HETP/m Height of theoretical plate divided into
particle size.
Asym. Asymmetry of the peak measured at
1/10 of its height.
RF Response factor, coefficient K1 of the
calibration curve.
Conc. Absolute concentration.
.
.
.
.
.
.
.