User guide

6 Devices
IC Net 2.3
232
Needle positions
Needle positions
Height, mm
Lift position of special needle position in
mm.
<Add>
Add a new special needle position.
<Delete> Delete the selected special needle position.
Settings
Lift rate
Lifting rate for the needle in mm/s.
Maximum lift way Lowest lift position possible in mm (read-
only).
Entry range: 0..235 mm, default 125 mm
Maximum swing angle
Maximum swing angle possible in ° (read-
only).
Entry range: 0..330 °, default 117 °
<Edit> Change maximum possible lift way and
swing angle.
<Set> Send parameters to 838 Advanced Sample
Processor.