Instruction Manual

6 Devices

IC Net 2.2

automatically switched off. At the same

time, the Pressure field color in the 709 set-

tings window and in the WATCH WINDOW is

changed to the value set for Out of range.

<Set> Send current parameters immediately to the

709 IC Pump (only available if pump is run-

ning). Parameters are not stored in the sys-

tem file (*.smt) as long as the file is not

saved.

<Start> Set current parameters and start 709 IC

Pump drive.

<Stop> Stop 709 IC Pump drive.

Links

The Links tab of the 709 IC Pump is used for COM port selection

and settings (details see section 5.2.4 Links).

Advanced

The Advanced tab of the 709 IC Pump window is only available for a

connected system.

Correction factor Flow correction factor to adjust the dis-

played flow to the actual flow measured

with the aid of a measuring cylinder.

Entry range: 0.90 ... 1.10

<Ask> Read current Correction factor value.

<Set> Send current Correction factor value to the

709 IC Pump. This parameter is not stored

in the system file (

*.smt) as long as the file is

not saved.