Instruction Manual

6 Devices

IC Net 2.2

The cable connection between 709 IC Pump and 732 IC Detec-

tor, 762 IC Interface or PC must be made before switching on

the instrument. In order to operate the 709 IC Pump with «IC

Net», the external control must be switched on using the [ Ext. ]

key.

For detailed information about the 709 IC Pump see 709 Instruc-

tions for Use.

6.7.2 709 IC Pump icon

The 709 icon is available in the SYSTEM window if an Isocratic pump

709 or an Isocratic pump 709 for 732 has been installed with the New

system wizard

or by using the Setup/New devices/Install new device

option of the SYSTEM window (see section 6.1.2).

If the system is connected and the 709 icon is clicked with the

right mouse button, the following menu appears:

Open Open the 709 IC Pump window for parameter settings

(this window can also be opened by double-clicking

the icon).

Unlink Delete the 709 icon from the system.

6.7.3 709 IC Pump window

709 icon / Open

The 709 IC Pump window for parameter settings and manual con-

trol is opened by selecting this menu option with the right mouse

button or by double-clicking the

709 icon in the SYSTEM window. It

consists of the three tabs Settings, Links and Advanced.

Settings

The Settings tab of the 709 IC Pump window is only available for a

connected system.