Instruction Manual

6 Devices
IC Net 2.2
84
* only available for 733 IC Separation Center connected to 732
Time program
The Program tab is only available for a 733.0XX0 Separation Center
connected to a 762 IC Interface. The 733 IC Separation Center
that is connected to a 732 IC Detector is controlled by the time
program of the detector.
On the Program tab of the 733.0XX0 Separation Center window a
user-defined time program can be entered. This program is
started automatically as defined in the Start mode window (see
section 4.4.3) either at the moment the determination is started
(Start with determination) or at the moment the sample is injected
(Start with inject).
First column Time at which program instruction is ap-
plied.
Entry range: 0.0 ... 999.9 min
If no time is entered, the program instruc-
tion is applied together with the last instruc-
tion with time entry.
Second column Program instruction (see below).
Third column Parameter for program instruction (see be-
low).
ENABLED Enable program start (a disabled program
is not started).
<Add> Add new program instruction.
<Delete> Delete selected program instruction.