Instruction Manual

6 Devices

IC Net 2.2

6.6.2 733 IC Separation Center icon

The 733 icon is available in the SYSTEM window if a 733 IC Separa-

tion Center

has been installed with the New system wizard or by us-

ing the Setup/New devices/Install new device option of the SYSTEM

window (see section 6.1.2).

If the system is connected and the 733 icon is clicked with the

right mouse button, the following menu appears:

Open Open the 733 IC Separation Center window for parame-

ter settings (this window can also be opened by dou-

ble-clicking the icon).

Unlink Delete the 733 icon from the system.

6.6.3 733 IC Separation Center window

733 icon / Open

The 733 IC Separation Center window for parameter settings is

opened by selecting this menu option with the right mouse button

or by double-clicking the 733 icon in the SYSTEM window. It con-

sists of the three tabs Manual, Program and Links.

Manual

The Manual tab of the 733 IC Separation Center window is only avail-

able for a connected system. The parameters and buttons for

manual operation depend on the type of instrument connected.