Instruction Manual

6.4 761 Compact IC

IC Net 2.2

6.4 761 Compact IC

6.4.1 761 Compact IC features

The Metrohm 761 Compact IC is a PC-controlled system for ion

chromatographic analyses. The two following versions are avail-

able:

• 2.761.0010 Compact IC without suppressor module

• 2.761.0020 Compact IC with suppressor module

All the parts of the 761 Compact IC like injection valve, high-

pressure pump, conductivity detector, suppressor module and

peristaltic pump, are normally fully controlled by the «761 Com-

pact IC» program. However, the 761 Compact IC can also be

operated using the «IC Net» program. This program also enables

the operation of more than one 761 Compact IC with one PC.

The 761 Compact IC is normally connected to a PC COM port us-

ing the 6.2134.100 connecting cable.

For detailed information about the 761 Compact IC see 761 In-

structions for Use.

6.4.2 761 Compact IC icon

System disconnected System connected System connected

Injection valve in Injection valve in

"INJECT"

position "FILL" position

The 761 icon is available in the system window if a 761 Compact IC

has been installed with the New system wizard or by using the

Setup/New devices/Install new device option of the SYSTEM window

(see section 6.1.3). If the system is connected, the

761 icon con-

tains two buttons for manual control of the injection valve at the

761 Compact IC:

<Inject> Switch the injection valve to the "Inject" position.

<Fill> Switch the injection valve to the "Fill" position.