Instruction Manual

6.1 Device installation

IC Net 2.2

For every device to be controlled with «IC Net», open the group

which contains this device, select the device and the Serial port of

the interface where the device is connected to. After clicking on

<Add to system>, the device is added to the SYSTEM window. If

desired, an additional data recorder and a timer of the More mod-

ules

group can be added to the system.

Details to the other steps of the system wizard procedure (proc-

essing method, data source) see section 4.1.1.

6.1.2 Install new devices in system window

SYSTEM / Setup / New devices/ Install new device

Add new devices to the open SYSTEM window using the New

system wizard

window (see above). For every device to be added

to the system, open the group which contains this device and se-

lect the device and the serial port of the interface where the de-

vice is connected to. After clicking on

<Add to system>, the device

is added to the

SYSTEM window. If desired, an additional data re-

corder and a timer of the More modules group can be added to

the system.

6.1.3 Install existing devices in system window

SYSTEM / Setup / New devices/ Link to existing device

Add devices to the open SYSTEM window which

are already present on the toolbar. This is mostly

used to add the 762 IC Interface events. For every

device to be added to the system, select the de-

vice and click on <OK>.

6.1.4 Delete devices

Icon / Unlink

Devices in a SYSTEM window can be deleted by clicking on the

device icon using the right mouse button an select the

Unlink

menu item.