Instruction Manual

7.3 Method setup
IC Net 2.2
151
Program before Name and path of the program to be
started automatically before the run is
started.
Program after Name and path of the program to be
started automatically after the run is fin-
ished.
7.3.5 Math
Tab Math of Method setup window with parameters that are used
for various types of calculations.
Parameter Selection of calculation parameter:
Formula set Formula setting by customer (Custom formu-
lae
) or according either to European Pharma-
copoeia
or US Pharmacopoeia.
Theoretical plates Selection of calculation formula for number
of theoretical plates if
Formula set = Custom
formulae
is set.
Resolution Selection of calculation formula for resolu-
tion if Formula set = Custom formulae is set.
Asymmetry Selection of calculation formula for asym-
metry if Formula set = Custom formulae is
set.
Formula Selection of calculation formula for the
calculation parameter selected for Parame-
ter
. With Parameter = Formula set the follow-
ing settings are possible:
Custom formulae Formula setting by customer.