Instruction Manual

6 Devices
IC Net 2.2
104
Manual
The Manual tab of the 793 Sample Prep Module window for manual
operation is only available for a connected system.
Pump
<On> Start pump drive.
<Off> Stop pump drive.
Actuator
<Step> Rotate sample preparation module to the
next position. The time since the last step
action is displayed in the field beside the
<Step> button.
Start pump with startup hardware
Automatic start of pump drive with Startup
hardware
.
Time program
On the Program tab of the 793 Sample Prep Module window a user-
defined time program can be entered. This program is started
automatically as defined in the Start mode window (see 4.4.3) ei-
ther at the moment the determination is started (Start with determi-
nation
) or at the moment the sample is injected (Start with inject).