Instruction Manual

6.12 793 Sample Prep Module
IC Net 2.2
103
6.12 793 Sample Prep Module
6.12.1 793 Sample Prep Module features
The Metrohm 793 Sample Prep Module consists of a control
unit with a 2-channel peristaltic pump and a block containing the
sample preparation module.
The 793 Sample Prep Module, which is normally operated manu-
ally using the keypad of the instrument or automatically via 732 IC
Detector via remote interface, can be fully operated using the «IC
Net» program. The 793 Sample Prep Module is normally con-
nected to two of the event line connections of the 762 IC Interface
using two optional 6.2128.180 cables. Examples for interconnec-
tions with the 793 Sample Prep Module can be found in the 762
Instructions for Use.
In order to operate the 793 Sample Prep Module with «IC Net»,
the external control must be switched on using the [ Remote ]
key.
For detailed information about the 793 Sample Prep Module see
793 Instructions for Use.
6.12.2 793 Sample Prep Module icon
The 793 icon is available in the SYSTEM window if a 793 Sample
Prep Module
has been installed with the New system wizard or by
using the Setup/New devices/Install new device option of the SYS-
TEM
window (see 6.1.2).
If the system is connected and the 793 icon is clicked with the
right mouse button, the following menu appears:
Open Open the 793 Sample Prep Module window for parame-
ter settings (this window can also be opened by dou-
ble-clicking the icon).
Unlink Delete the 793 icon from the system.
6.12.3 793 Sample Prep Module window
793 icon / Open
The 793 Sample Prep Module window for parameter settings is
opened by selecting this menu option with the right mouse button
or by double-clicking the
793 icon in the SYSTEM window. It con-
sists of the three tabs
Manual, Program, and Links.