Owner's manual

6 Devices
IC Net 2.0
90
Status display
The current status of the 766 IC Sample Processor can be dis-
played on the Current state subtab of the Manual tab which is only
available for a connected system.
Sample Display of current sample position.
Beaker position Display of current beaker position.
Lift position Display of current lift position in mm.
Pump state Display of current pump state (on, off).
Status of the 8 input lines
Status of the remote input lines.
Status of the 14 output lines
Status of the remote output lines.
<Ask> Read current values from 766 IC Sample
Processor.
For detailed information about the 766 IC Sample Processor see
766 Instructions for Use.
Time program
On the Program tab of the 766 IC Sample Processor window a user-
defined time program can be entered. This program is started
automatically as defined in the Start mode window (see section
4.4.3) either at the moment the determination is started (Start with
determination) or at the moment the sample is injected (Start with
inject).