Owner's manual

6.10 750 Autosampler

IC Net 2.0

Loop size is Size of the sample loop at the 733 IC

Separation Center. If the loop size is

> 20 µL, only 3 injections per sample vial

are possible.

<Move needle> Move transfer needle to the desired vial po-

sition (1...128 or Home).

<Lower needle> Lower transfer needle to the desired posi-

tion (1...4).

<Rinse needle> Start manual rinsing using the desired vial

(1...128).

Switch injection valve at the 733 IC Separa-

tion Center to the desired position (FILL or

INJECT).

<Disconnect> Enable manual operation of the 750 Auto-

sampler using the keypad.

For detailed information about the 750 Autosampler see 750 In-

structions for Use.

Injection

The Injection tab of the 750 Autosampler window for performing

manual injections is only available for a connected system.