Owner's manual

6 Devices

IC Net 2.0

6.9 754 Dialysis Unit

6.9.1 754 Dialysis Unit features

The Metrohm 754 Dialysis Unit is a unit for on-line sample di-

alysis before sample injection. It consists of a 2-channel peristal-

tic pump and a dialysis cell.

The 754 Dialysis Unit, which is normally operated manually using

the keypad of the instrument or automatically via 732 IC Detector

via remote interface, can be fully operated using the «IC Net»

program. The 754 Dialysis Unit is normally connected to one of

the event line connections of the 762 IC Interface using the op-

tional 6.2128.180 cable. Examples for interconnections with the

754 Dialysis Unit can be found in the 762 Instructions for Use.

In order to operate the 754 Dialysis Unit with «IC Net», the exter-

nal control must be switched on using the [ Remote ] key.

For detailed information about the 754 Dialysis Unit see 754 In-

structions for Use.

6.9.2 754 Dialysis Unit icon

The 754 icon is available in the SYSTEM window if a 754 Dialysis

Unit has been installed with the New system wizard or by using the

Setup/New devices/Install new device option of the SYSTEM window

(see section 6.1.2).

If the system is connected and the 754 icon is clicked with the

right mouse button, the following menu appears:

Open Open the 754 Dialysis Unit window for parameter set-

tings (this window can also be opened by double-

clicking the icon).

Unlink Delete the 754 icon from the system.

6.9.3 754 Dialysis Unit window

754 icon / Open

The 754 Dialysis Unit window for parameter settings is opened by

selecting this menu option with the right mouse button or by

double-clicking the 754 icon in SYSTEM window. It consists of the

three tabs Manual, Program, and Links.