Owner's manual

6.8 753 Suppressor Module

IC Net 2.0

6.8 753 Suppressor Module

6.8.1 753 Suppressor Module features

The Metrohm 753 Suppressor Module consists of a control unit

with a 2-channel peristaltic pump and a block containing a sup-

pressor module.

The 753 Suppressor Module, which is normally operated manu-

ally using the keypad of the instrument or automatically via 732 IC

Detector via remote interface, can be fully operated using the «IC

Net» program. The 753 Suppressor Module is normally con-

nected to two of the event line connections of the 762 IC Interface

using two optional 6.2128.180 cables. Examples for interconnec-

tions with the 753 Suppressor Module can be found in the 762

Instructions for Use.

In order to operate the 753 Suppressor Module with «IC Net»,

the external control must be switched on using the [ Remote ]

key.

For detailed information about the 753 Suppressor Module see

753 Instructions for Use.

6.8.2 753 Suppressor Module icon

The 753 icon is available in the SYSTEM window if a 753 Suppressor

Module has been installed with the New system wizard or by using

the Setup/New devices/Install new device option of the SYSTEM win-

dow (see 6.1.2).

If the system is connected and the 753 icon is clicked with the

right mouse button, the following menu appears:

Open Open the 753 Suppressor Module window for parameter

settings (this window can also be opened by double-

clicking the icon).

Unlink Delete the 753 icon from the system.

6.8.3 753 Suppressor Module window

753 icon / Open

The 753 Suppressor Module window for parameter settings is

opened by selecting this menu option with the right mouse button

or by double-clicking the 753 icon in the SYSTEM window. It con-

sists of the three tabs Manual, Program, and Links.