Owner's manual

6 Devices

IC Net 2.0

6.4 733 IC Separation Center

6.4.1 733 IC Separation Center features

The Metrohm 733 IC Separation Center is a thermally and

electronically isolated wet part which accommodates injectors,

columns, detectors, suppressor module and pulsation dampener

and is controlled by and connected to the 732 IC Detector. The

following versions are available:

• 2.733.0010 IC Separation Center with 1 injector

• 2.733.0020 IC Separation Center with 2 injectors

• 2.733.0120 IC Separation Center with 2 injectors, metal-free

• 2.733.0030 IC Separation Center with 1 injector and 1 sup-

pressor module

• 2.733.0130 IC Separation Center with 1 injector and 1 sup-

pressor module, metal-free

The 733 IC Separation Center, which is normally operated by the

732 IC Detector, can be fully operated using the «IC Net» pro-

gram. The 733 IC Separation Center with one injection valve is

normally connected to the 732 IC Detector using the 6.2125.090

cable. For the operation of a 733 IC Separation Center with two

injection valves, two individual 732 IC Detectors are needed.

Each of this detectors is connected to the 733 IC Separation

Center using a 6.2125.090 cable. For operation of a two-valve

system with «IC Net», two 732 icons and two 733 icons (one for

valve A and one for valve B) have to be installed in the SYSTEM

window.

For detailed information about the 733 IC Separation Center see

732/733 Instructions for Use. Examples for interconnections

with the 733 IC Separation Center, the 732 IC Detector and the

762 IC Interface can be found in the 762 Instructions for Use.

6.4.2 733 IC Separation Center icon

The 733 icon is available in the SYSTEM window if a 733 IC Separa-

tion Center has been installed with the New system wizard or by

using the Setup/New devices/Install new device option of the SYS-

TEM window (see section 6.1.2).