Owner's manual

6.3 732 IC Detector

IC Net 2.0

6.3 732 IC Detector

6.3.1 732 IC Detector features

The Metrohm 732 IC Detector is a conductivity detector for ion

chromatography. The associated thermostatable detector block

can be used for recording of chromatograms with and without

chemical suppression and is normally installed in the 733 IC

Separation Center. The two following versions are available:

• 2.732.0010 IC Detector with standard detector block

• 2.732.0110 IC Detector with metal-free detector block

The 732 IC Detector, which is normally operated using the key-

pad of the instrument, can be fully operated using the «IC Net»

program. The 732 IC Detector is normally connected to the 762

IC Interface using the 6.2134.080 or 6.2134.090 cable. Examples

for interconnections with the 732 IC Detector can be found in the

762 Instructions for Use.

In order to operate the 732 IC Detector with «IC Net», the fol-

lowing RS settings have to be made using the [ CONFIG ] key on

the 732 IC Detector panel:

>CONFIG/RS settings/handshake: Swchar

>CONFIG/RS settings/RS control: on

For detailed information about the 732 IC Detector see 732/733

Instructions for Use.

6.3.2 732 IC Detector icon

The 732 icon is available in the SYSTEM window if a 732 IC Detector

has been installed with the New system wizard or by using the

Setup/New devices/Install new device option of the SYSTEM window

(see section 6.1.2).

If the system is connected and the 732 icon is clicked with the

right mouse button, the following menu appears:

Open Open the 732 IC Detector window for parameter set-

tings (this window can also be opened by double-

clicking the icon).

Unlink Delete the 732 icon from the system.