Owner's manual

5 Interfaces

IC Net 2.0

Handshake Enable/disable software handshake mode.

Selection: Swchar, none

Default value: SWchar

<ASK> Read current parameters from 771 Com-

pact Interface.

<SET> Send current parameters to 771 Compact

Interface.

Links

The Links tab of the 771 IC Interface is used for COM port selection

and settings (details see section 5.2.4).

5.4 761 Compact IC

5.4.1 761 Compact IC features

The Metrohm 761 Compact IC is a PC-controlled system for ion

chromatographic analyses. The two following versions are avail-

able:

• 2.761.0010 Compact IC without suppressor module

• • 2.761.0020 Compact IC with suppressor module

All the parts of the 761 Compact IC like injection valve, high-

pressure pump, conductivity detector, suppressor module and

peristaltic pump, are normally fully controlled by the «761 Com-

pact IC» program. However, the 761 Compact IC can also be

operated using the «IC Net» program. This program also enables

the operation of more than one 761 Compact IC with one PC.

The 761 Compact IC is normally connected to a PC COM port

using the 6.2134.100 connecting cable.

For detailed information about the 761 Compact IC see 761 In-

structions for Use.

5.4.2 761 icon on the toolbar

The 761 icon is available on the toolbar if a 761 Compact IC has

been installed with the new system wizard or by using the <Install

device> option of the WORKPLACE window (see section 5.1.2). By

clicking this icon the 761 Compact IC window for parameter set-

tings opens.