Owner's manual

5 Interfaces

IC Net 2.0

<Add> Add new program instruction.

<Delete> Delete selected program instruction.

<Verify> Test the time program (error messages are

displayed if program is wrong).

List of program instructions

The following program instructions can be added to the time pro-

gram on the Program subpage:

Instruction Parameter entry Meaning

Events 0, 1, p, * Set event output lines 1...7 to the

desired values. For entry of the first

value, enter 1, 0, p or *. For entry of

the other values, move the cursor in

front of the value to be changed

and enter 1, 0, p or *.

Program END, RESET The END flag can be used to end a

program, especially if the program

time should be longer than the

chromatogram duration. Additional

steps after this flag are not allowed.

The RESET flag is used to reset the

parameters to the system startup

values.

Events configuration

On the Events configuration subtab user-defined event commands

can be defined, which can be inserted into a time program after

being activated with <Activate>.

Name (1

column) User-definable name of the event com-

mand (e.g. Start_766).