Owner's manual

5.2 762 IC Interface

IC Net 2.0

5.2 762 IC Interface

5.2.1 762 IC Interface features

The Metrohm 762 IC Interface is available as a one system ver-

sion (2.762.0010) or a two system version (2.762.0020). Each

system can control a complete ion chromatography or HPLC

equipment and contains the following parts:

• Two 24-bit Analog-to-Digital Converters (often abbreviated

as ADC) to acquire two analog signals from two different de-

tectors simultaneously (for example conductivity detection and

UV detection).

• • One external start input.

• One start button at the interface front panel.

• RS232 communication ports to control up to eight devices

of a complete ion chromatography equipment.

• Seven Event output lines.

The 762 IC Interface is normally connected to a PC COM port

using the 6.2134.100 connecting cable.

For detailed information about the 762 IC Interface see 762 In-

structions for Use.

5.2.2 762 icon on the toolbar

The 762 icon is available on the toolbar if a 762 IC Interface has

been installed with the new system wizard or by using the <Install

device> option of the WORKPLACE window (see section 5.1.2). By

clicking this icon the 762 IC Interface window for parameter set-

tings opens.

5.2.3 762 icons in the system window

The 762 System 1 and 762 System 2 icons are available in the SYS-

TEM window if the 762 System [1] or 762 System [2] have been in-

stalled with the Install existing devices option (see section 6.1.3).

By clicking this icon using the right mouse button, the following

menu items can be selected:

Open Open the 762 System [#] window for programming the

event output lines (this window can also be opened by

double-clicking the icon).

Unlink Delete the 762 icon from the system.