Owner's manual

2 Fundamentals of the operation
IC Net 2.0
10
2.6 Overview of file types
The following file types are produced by the «IC Net» software:
*.adb Autodatabase file
Contains chromatogram and method data of all deter-
minations.
*.bar Batch reprocessing file (binary file)
Contains batch reprocessing data. The *.bar file is
stored automatically in the Data folder.
*.cal Calibration file (binary file)
Contains calibration data, which can be exported with
IC Net / Method / Calibration / Export calibration.
The *.cal file is stored automatically in the Methods
folder.
*.chw Chromatogram file (binary file)
Contains chromatogram, system and method data of a
determination.
The *.chw file is stored automatically in the Data folder.
*.exc Exception file (ASCII file)
Contains exceptions from normal running and error
messages.
The *.exc file is stored automatically in one of the day
subfolders of the Log folder.
*.hst History file (ASCII file)
Contains history of commands and program actions.
The *.hst file is stored automatically in one of the day
subfolders of the Log folder.
*.log Log file (ASCII file)
Contains log file of data communication between PC
and instruments.
The *.log file is stored automatically in one of the day
subfolders of the Log folder.
*.mtw Method file (binary file)
Contains the data acquisition method, which can be
linked to a system.
The *.mtw file is stored automatically in the Methods
folder.
*.que Sample queue file (binary file)
Contains a sample data table.
The *.que file is stored automatically in the Systems
folder.