Owner's manual

8 Chromatograms
IC Net 2.0
152
Component name Name of the component.
Component name + Quantity
Name and quantity of the component.
Channel labels Label for data acquisition channel.
At start Channel label is shown at the start of the
chromatogram.
In corner Channel label is shown in the upper right
corner of the chromatogram.
Show baseline and peaks
Baselines are shown.
Baseline marker Start and end of baselines are marked.
Label always visible Label is shown always with zooming.
Set all Set peak labeling of all opened chroma-
tograms automatically to the settings in the
selected chromatogram window.
Draw every chromatogram point
Show chromatogram with all measured
points (disable smoothing).
Select channel
Tab Select channel of the Appearance window for selection of
channels for multi-channel chromatograms.
Selection window The selection window shows all chroma-
tograms of the batch reprocessing queue
which can be selected for display. If total is
selected, all chromatograms are added
and the resulting addition curve is shown.
<Show all> Select all chromatograms in the selection
window.
<Hide all> Deselect all chromatograms in the selec-
tion window.