Owner's manual

7 Methods
IC Net 2.0
106
7.3 Method setup
IC NET / Method / Method setup
This menu item opens the Method setup window which includes
the most common parameters for data acquisition and evaluation
of the method and consists of the following tabs:
General General information on determination.
Measure Important data acquisition parameters.
Filters Parameters for noise filtration.
Processing Set actions that are performed when the
chromatogram finishes.
Math Parameters that are used for various types
of calculations.
7.3.1 General
Tab General of Method setup window with general description of
the method and determination. This tab is identical to the General
tab called with Method / Passport (see section 7.2.1).
7.3.2 Measure
Tab Measure of Method setup window with data acquisition pa-
rameters.
Status Chromatogram measurement status (read-
only).
Sampling rate Sampling rate for recording the chroma-
togram (read-only; only displayed correctly
for running or recorded chromatograms).
Frequency divisor Divisor to reduce the sampling rate.
Entry range: 1……9999
Start delay Time delay before starting data acquisition
in min.
Detector name User-defined detector name.
Data acquisition sourceMeasuring channel (read-only).